Whatever you need to haul, the Reading Marauder SL dump body can get the job done. The Marauder SL dump body was designed to provide the most economical means to maximize your payload and increase fuel efficiency. The heavy-duty understructure, rugged steel floor and sidewall construction and high-capacity hoist will give you a tough, durable and reliable dump body. It is available in 9’ and 11’ lengths.
Fully-boxed dirt shedding top rail.
Double-acting (power-up/power-down) 12-Volt electric hydraulic power unit for ease of operation.
Dual vertical reinforcements on a 10-gauge tailgate with formed box sections, top and bottom.
Features adjustable linkage.
Provides additional structural strength to the body.
Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
40” full cab shield.
Full-width rear apron with double-acting tailgate and quick-release tailgate hardware. Recessed LED tail lights are rubber grommet shock-mounted.
Heavy-duty steel hinges with grease fittings for lubricating.
Subframe-mounted, double-acting electric hydraulic scissor hoist with an 8 ton (MD92) and 12 ton (MD95 & MD113) capacity and 50° dumping angle. Hoist assembly includes lubricating grease fittings on hoist and hinge assembly. Features safety body prop, grease zerks for ease of service, an all-weather pump and motor cover and in-cab tethered hand-held control. Black powder coat finish.
12-gauge steel double-wall construction with upper and lower formed box sections.
Two-piece HRA1011 steel floor plate with angled sidewalls to floor to eliminate bridging of material.
¼ cab shield with window and tarp tension bar retainer.
Single lever fast-action drop-down tailgate release.
Heavy-duty latch pins with grease fittings.
Consists of 7-gauge formed-channel long sills and 3" structural crossmembers.
Interlaced understructure provides lower body-mounted height (models MD92 and MD113).
Alarm provides additional safety on the job site.
Guillotine-style in sliding-track coal chute door.
Special colors available in urethane top coat finish for an additional charge.
40” full cab shield.
1/2″ steel drop plate with adjustable mounting heights, ICC underride, safety chain D-rings and choice of 2-5/16″ ball/pintle combo, 2″ ball/pintle combo or 2″ receiver tube using Grade 8 hardware.
I & L provides secure and convenient access to tools and supplies. Vertical stack compartments.
Bolt-on sideboard gusset extension package available.
Installed in front of rear axle to prevent debris from hitting the truck cab when backing up.
Additional underbody tool boxes are available in aluminum or steel; sizes from 24″ to 60″. Can be installed on curb side or street side.
|Marauder and SL (Inside Dimensions)|
|FORD, RAM, GM||60”||9′ 0”||87”||16”||22”||2-4||11.6||1380 lbs.|
|FORD, RAM, GM||84”||11′ 0”||87”||16”||22”||3-4||9.3||1560 lbs.|